.png?noresize&width=110&height=110&name=citations-icon%20(1).png)
Screening for novel antibiotics in venom against Staphylococcus aureus
The threat of growing antibiotic resistance is constantly increasing. Find out here how venom fractions are emerging as a beacon of hope in the search for novel antibiotics.
FLUOstar Omega
필터 기반 다중 모드 마이크로 플레이트 리더
FLUOstar® Omega는 세 가지 측정 모드가 있는 멀티 모드 마이크로플레이트 리더입니다.
초고속 UV / vis 분광기 또는 흡광도 용 필터는 물론 다른 모든 검출 모드에 대해 매우 민감한 필터를 사용합니다. FLUOstar Omega는 생명 과학 분야에 이상적인 플레이트 리더입니다.
평가
One of the best devices in my lab
We got our Fluostar Omega in 2010. It has been in frequent regular use since then and was...
★★★★☆
4.7/5.0 (51)
FLUOstar Omega
FLUOstar Omega는 형광 강도(FRET 및 TRF 포함), 발광(BRET 포함) 및 UV/vis 흡광도의 최대 3가지 검출 모드가 있는 다목적 멀티모드 마이크로플레이트 리더입니다.
주요 기능
- 고속 흡광도 측정
- 384-well까지 측정 가능
- 상단 및 하단 읽기
- 45 또는 65 ° C까지의 인큐베이션
- 사용자 정의 떨림
- 웰 당 최대 900 데이터 포인트로 잘 스캐닝
- 동시 시약 주입 및 검출 기능이있는 고정밀 인젝터
- 소량 측정
고객 성공 사례
우리의 기술
dTAG protein degradation assay for the targeted degradation of proteins of interest
Have you heard of dTAG degraders yet? Check out this novel approach in targeted protein degradation and learn how it can be used to identify disease-relevant proteins.
The InToxSA assay, for quantifying Intracellular Cytotoxic S. aureus Phenotypes
Looking for a method to study intracellular bacterial cytotoxicity? This AppNote presents a novel method based on the monitoring of propidium iodide uptake with the CLARIOstar Plus.
Wastewater testing using the biotoxic effect on the luminescent bacterium Aliivibrio fischeri
Are you looking for a device to measure sample`s biotoxicity with Aliivibrio fischeri? BMG LABTECH's luminometers fulfil this task and offer additional advantages over the classic cuvette-based analysis.
Identification of single-cell immunophenotypes with biocytometry
You want to analyse cellular immune types of single cells but don't have a FACS device? Here we present an alternative microplate-based method and its simplified workflow on the VANTAstar.
Bead-based Assay using pHrodo™ Red to Evaluate Phagosome Acidification
Acidification is an important tool of innate immune cells. Read here how the pH sensor pHrodo Red and the CLARIOstar Plus with ACU help to track phagosome acidification in real-time.
Detection Modes
Fluorescence intensity - incl. FRET
Luminescence (flash and glow) - incl. BRET
UV/Vis absorbance spectra
Measurement Modes
Top and bottom reading
Endpoint and kinetic
Sequential multi excitation
Sequential multi emission
Simultaneous Dual Emission (FI and LUM)
Spectral scanning (absorbance)
Ratiometric measurements
Microplate Formats
6 to 384-well plates, user-definable
LVis Plate with 16 low volume microspots (2 μL)
Microplate Carrier
Robot compatible
Light Sources
High energy xenon flash lamp
Detectors
Low noise photomultiplier tube
CCD spectrometer
Wavelength Selection
Optical filters: ex and em wheels for 8 filters each
UV/vis absorbance spectrometer: full spectra or 8 distinct wavelengths in < 1 sec/well
Spectral Range
Filters
240 - 740 nm or 240 - 900 nm for FI
240 - 740 nm for LUM
Spectrometer
220 - 1000 nm for ABS; wavelength precision: ≤ 0.5 nm
Sensitivity
FI
<0.2 fmol/well FITC.
TRF
< 30 amol/well europium.
LUM
< 20 amol/well ATP.
ABS with spectrometer
Selectable spectral resolution: 1, 2, 5, and 10 nm.
OD range: 0 to 4 OD; photometric resolution: 0.001 OD.
Accuracy: < 1% at 2 OD.
Precision: < 0.5% at 1 OD and < 0.8% at 2 OD.
Linearity: ≤ 0.8% at 2.0 OD.
ABS with filters
OD range: 0 to 4 OD
Reproducibility: ±0.010 OD for 0-2 OD range
Read Times
Flying mode (1 flash)
9 s (96), 16 s (384)
Shaking
Linear, orbital, and double-orbital with user-definable time and speed
Purge Gas Vent
System to inject an atmosphere or to pull a vacuum into the reader
Incubation
+4 °C above ambient up to 45 °C or 65 °C
The upper heating plate of the incubation chamber operates at 0.5 °C more than the lower plate. This prevents condensation build-up on the lid or sealer
Software
Multi-user Reader Control and MARS Data Analysis Software included
FDA 21 CFR Part 11 compliant
Dimensions
Width: 44 cm, depth: 48 cm, height: 30 cm; weight: 28 kg
Optical Filters
Excitation and emission filter wheels for 8 filters each
Optical Path Guides
Top: liquid-filled light guides
Bottom: fiber optics
Reagent Injection
Up to 2 built-in reagent injectors
Injection at measurement position (6 to 384-well)
Individual injection volumes for each well (3 to 500 µL)
Variable injection speed up to 420 µL/s
Up to four injection events per well
Reagent back flushing
Power Requirements
- 100-240 V, 50/60 Hz, max. peak 300 VA
Power Consumption
- Instrument off: 0 W
- Normal operating conditions: 25 W
- Normal operating conditions, incubation set to 37°C: 60 W
Optional Accessories
LVis Plate
Sample capacity: sixteen separate microdrop wells for 2 µL samples; one standard cuvette position for up to 1 mL samples
Quality control internal standards (optional): four NIST traceable optical density filters (approximate values of 0.1, 0.3, 0.6 and 1.0 OD); one holmium oxide filter for wavelength accuracy
Dimensions: conforms to SBS standards for microplates
THERMOstar
Microplate incubator and shaker
Atmospheric Control Unit (ACU)
Actively regulates O2 and CO2 - 0.1-20%
Stacker
Magazines for up to 50 plates - continuous loading feature
Optical Filters
Excitation and emission filters
Upgrades
Please contact your local representative for upgrades including options such as detection modes, reagent injectors, etc
*
LOD = 3 x SD (20 blanks) / slope (6 pt std curve)
Microplates: white for LUM; black for FI; clear for ABS
96 = 96-well microplates
384sv = 384-well small volume microplates
384g = 384-well glass bottom microplates
더 많은 효과를 얻으려면 : FLUOstar Omega 액세서리
THERMOstar
Intelligent microplate incubation
Microplate Stacker
Microplate handling system
LVis Plate
Low-volume measurements
Filters
Filters for a wide range of applications
Evaluation Plate
Functional Microplate Reader Validation
Atmospheric Control Unit
Enhanced cell-based assays
Compare two readers
Detection Modes
Fluorescence intensity - incl. FRET
Luminescence (flash and glow) - incl. BRET
UV/Vis absorbance spectra
Measurement Modes
Top and bottom reading
Endpoint and kinetic
Sequential multi excitation
Sequential multi emission
Simultaneous Dual Emission (FI and LUM)
Spectral scanning (absorbance)
Ratiometric measurements
Microplate Formats
6 to 384-well plates, user-definable
LVis Plate with 16 low volume microspots (2 μL)
Microplate Carrier
Robot compatible
Light Sources
High energy xenon flash lamp
Detectors
Low noise photomultiplier tube
CCD spectrometer
Wavelength Selection
Optical filters: ex and em wheels for 8 filters each
UV/vis absorbance spectrometer: full spectra or 8 distinct wavelengths in < 1 sec/well
Spectral Range
Filters
240 - 740 nm or 240 - 900 nm for FI
240 - 740 nm for LUM
Spectrometer
220 - 1000 nm for ABS; wavelength precision: ≤ 0.5 nm
Sensitivity
FI
<0.2 fmol/well FITC.
TRF
< 30 amol/well europium.
LUM
< 20 amol/well ATP.
ABS with spectrometer
Selectable spectral resolution: 1, 2, 5, and 10 nm.
OD range: 0 to 4 OD; photometric resolution: 0.001 OD.
Accuracy: < 1% at 2 OD.
Precision: < 0.5% at 1 OD and < 0.8% at 2 OD.
Linearity: ≤ 0.8% at 2.0 OD.
ABS with filters
OD range: 0 to 4 OD
Reproducibility: ±0.010 OD for 0-2 OD range
Read Times
Flying mode (1 flash)
9 s (96), 16 s (384)
Shaking
Linear, orbital, and double-orbital with user-definable time and speed
Purge Gas Vent
System to inject an atmosphere or to pull a vacuum into the reader
Incubation
+4 °C above ambient up to 45 °C or 65 °C
The upper heating plate of the incubation chamber operates at 0.5 °C more than the lower plate. This prevents condensation build-up on the lid or sealer
Software
Multi-user Reader Control and MARS Data Analysis Software included
FDA 21 CFR Part 11 compliant
Dimensions
Width: 44 cm, depth: 48 cm, height: 30 cm; weight: 28 kg
Optical Filters
Excitation and emission filter wheels for 8 filters each
Optical Path Guides
Top: liquid-filled light guides
Bottom: fiber optics
Reagent Injection
Up to 2 built-in reagent injectors
Injection at measurement position (6 to 384-well)
Individual injection volumes for each well (3 to 500 µL)
Variable injection speed up to 420 µL/s
Up to four injection events per well
Reagent back flushing
Power Requirements
- 100-240 V, 50/60 Hz, max. peak 300 VA
Power Consumption
- Instrument off: 0 W
- Normal operating conditions: 25 W
- Normal operating conditions, incubation set to 37°C: 60 W
Optional Accessories
LVis Plate
Sample capacity: sixteen separate microdrop wells for 2 µL samples; one standard cuvette position for up to 1 mL samples
Quality control internal standards (optional): four NIST traceable optical density filters (approximate values of 0.1, 0.3, 0.6 and 1.0 OD); one holmium oxide filter for wavelength accuracy
Dimensions: conforms to SBS standards for microplates
THERMOstar
Microplate incubator and shaker
Atmospheric Control Unit (ACU)
Actively regulates O2 and CO2 - 0.1-20%
Stacker
Magazines for up to 50 plates - continuous loading feature
Optical Filters
Excitation and emission filters
Upgrades
Please contact your local representative for upgrades including options such as detection modes, reagent injectors, etc
*
LOD = 3 x SD (20 blanks) / slope (6 pt std curve)
Microplates: white for LUM; black for FI; clear for ABS
96 = 96-well microplates
384sv = 384-well small volume microplates
384g = 384-well glass bottom microplates